88
DISTRIBUTED DIGITAL FAULT RECORDER – INSTRUCTION MANUAL
VIEWING DATA IN THE DDFR ARCHIVER
CHAPTER 5: RETRIEVING AND VIEWING DDFR ARCHIVER DATA
5.3
Viewing Data in the DDFR Archiver
5.3.1
Archiver Records - General
As shown in section 5.2.3 above, you can set the location for accessing the data stored on
your computer by the DDFR Archiver. Once this location is defined and becomes your own
default location, the DDFR Archiver will create its own file structure as explained in section
5.1.3.
The DDFR Archiver Main Menu displays three types of Archiver Record:
Events
,
Waveforms
,
Data Logger
(the latter for UR relays only). These can also be accessed by
clicking on
Tools
in the menu at the top of this screen
FIGURE 5–5: DDFR Archiver Main Menu
5.3.2
Archiver Events Records
The Event Records retrieved from the relays include all of the following information
attached to each event:
•
Created Time:
Timestamp showing when the Event was recorded in the protection
relay
•
Event Type
: Field that indicates the reason the event was recorded. The different
Event Types available are as follows:
•
Alarm
•
System
•
Source Name:
Name of relay in which the Event was recorded
•
Display Name
: Name of DDFR to which Event was transferred from relay
•
Source Type
- Type of relay in which the Event was recorded (e.g. UR)
Summary of Contents for Multilin DDFR
Page 3: ......
Page 4: ......
Page 8: ...TOC IV DISTRIBUTED DIGITAL FAULT RECORDER INSTRUCTION MANUAL TABLE OF CONTENTS ...
