manualshive.com logo in svg

GE MFE DMS 2, Operating Manual

Share
Download
GE MFE DMS 2 Operating Manual Download Page 62

3. Setting Up the DMS 2

DMS 2 Operating Manual

              Page 51

Step 2: Press

 below the selection titled LANG. You’ll

note that the options available are English, German, French,
Spanish, Italian, Portuguese, Norwegian, Swedish, Finnish,
Dutch, and Russian. The default language is English.

Step 3: The language will be set to the choice last dis-
played.

Selecting the Date Format (GLOBAL-D-FMT)

Step 1: Activate the GLOBAL Submenu (if it’s not already

activated) by selecting it with 

 or 

 so that it’s high-

lighted. Five selections will appear across the bottom of the
display screen.

Step 2: Press

 below the selection titled D-FMT. You’ll

note that the following options are available:

•

Month/Day/Year—Default format

•

Day/Month/Year—International format

•

Year/Month/Day—Reverse international format

Step 3: The date format will be set to the choice last
displayed.

Setting the Date (GLOBAL-DATE)

Step 1: Activate the GLOBAL Submenu (if it’s not already

activated) by selecting it with 

 or 

 so that it’s high-

lighted. Five selections will appear across the bottom of the
display screen.

Step 2: In the center selection box, you’ll note that the
instrument will display what it believes to be the current date.

Step 3: To change the current date, press 

 below the

displayed date until the correct date is displayed.

Step 4: The current date will be set to the date last dis-
played.

Selecting the Time Format (GLOBAL-T-FMT)

Step 1: Activate the GLOBAL Submenu (if it’s not already

activated) by selecting it with 

 or 

 so that it’s high-

lighted. Five selections will appear across the bottom of the
display screen.

Summary of Contents for MFE DMS 2




































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands