GE MDS Mercury Series, Reference Manual

Page: 81 / 196

05-4446A01, Rev. C Mercury Reference Manual 73
•
Commit Changes and Exit Wizard
—Save and execute changes
made on this screen (shown only after changes have been
entered).
Configuring for TCP
Mode
Invisible place holder
Figure 3-36. TCP Client Menu (Remote)
•
Status
—Enable/Disable the serial data port.
•
IP Protocol
—TCP Client. This is the type of IP port offered by
the transceiver’s serial device server. [
TCP, UDP; TCP
]
•
Primary Host Address
—The IP address to be used as a destina-
tion for data received through the serial port.
[
Any legal IP address; 0.0.0.0
]
•
Primary IP Port
—The destination IP port for data packets
received through the serial port on the transceiver.
[
Any valid IP port; 30010
]
•
Secondary Host Address
—The IP address to be used as a desti-
nation for data received through the serial port, in case the
primary host address is not available.
[
Any legal IP address; 0.0.0.0
]
•
Secondary IP Port
—The destination IP port for data packets
received through the serial port on the transceiver, used along
with the secondary host address above.
[
Any valid IP port; COM1: 30010
]
•
Outgoing Connection’s Inactivity Timeout
—Amount of time (in
seconds) that the transceiver waits for data before terminat-
ing the TCP session. [
0–600; 600
]
•
Data Baud Rate
—Data rate (payload) for the
COM
port, in
bits-per-second. [
1,200–115,200; 19200
]
•
Byte Format
—Interface signaling parameters. Data bits, parity
and stop bits.
[
7N1, 7E1, 7O1, 8N1, 8E1, 8O1, 8N1, 7N2, 7E2, 7O2, 8N2, 8E2, 8O2;
8N1
]