GE MDS Mercury Series, Reference Manual

Page: 133 / 196

05-4446A01, Rev. C Mercury Reference Manual 125
NOTE:
To use the Auto Upgrade/Reboot feature, both the AP and
Remotes must already be running version 2.1.0 or newer firm-
ware.
•
Firmware for Upgrade
—Specifies the firmware version that the
Remotes should download, if they do not already have it.
Radio Test Menu
Using this menu, you can manually key the radio transmitter for perfor-
mance checks and set several parameters that will be used when the
Radio Mode is set to
Test
.
Invisible place holder
Figure 3-98. Radio Test Menu
NOTE :
Using Test Mode disrupts traffic through the radio. If the unit
is an Access Point, it will disrupt traffic through the
entire
network. The Test Mode function is automatically limited to
10 minutes.
Only use Test Mode for brief measurements
.
•
Radio Mode
—Sets/displays the radio’s operating mode. To
change the setting, press
A
on the PC’s keyboard and press the
Spacebar to toggle between the two settings. Press the Enter key
to select the desired state. [
Normal, Test; Normal
]
•
Test Status
—This read-only parameter shows the current state of
the radio.
[
Radio is Operational, Reconfiguring the Radio, Ready to KEY
]
The following parameters are read-only unless
A) Radio Mode
is first
selected and set to
Test
. In Test Mode, these items become selectable,
and you can set their entries using the Spacebar or with a numeric entry,
followed by pressing the Enter key.
•
Test Key
—Sets/displays keying status of the radio’s transmitter.
Use the Spacebar to view selections. [
disabled, enabled; disabled
]