VCR Operating Instructions
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
8–13
Setting up the LOGIQ
500
After the VCR is connected to the LOGIQ
500, the
LOGIQ
500 must also be set up.
Select the top menu Set Up from the software menu and select
System Parameters.
On page 5 of the System Parameters menu, set Port A or Port
B to VCR.
Then select SAVE to exit the menu.
NOTE: After changing the setting, turn OFF the system power
switch, then restart the system.
For reference, see
Chapter 14 (Customizing Your System) in
the Basic User Manual.
Figure 8–6. Set Up/System Parameters Menu Page 5
Summary of Contents for Logiq 500
Page 1: ......