Advanced Vascular
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
4–103
Advanced Vascular
(software option)
Overview
The Advanced Vascular software option provides increased
measurement and reporting capabilities for vascular and
venous studies.
Menu Selections
The Advanced Vascular menu selections offer more flexibility
than the Basic Software package. In the Advanced Menus with
Realtime Trace (Auto Doppler Calcs) activated, the user can
select:
S
left/right side on menu page one.
S
three Doppler sites on page three.
S
three stenosis sites on page four.
Each Doppler and Stenosis site can be edited (5 characters
maximum) on the Vascular Report pages.
The % Stenosis measurement can be performed by either a
distance or area measurement in Advanced Vascular. The
“% Stenosis Calculation” preset, found on Set Up/Preset
Program page 4, erases all previous % Stenosis measurement
results when this preset is changed. Depending on the
measurement method used, the Vascular Report shows either
an A (for area) or a D (for distance) after %Sten:.
The menus displayed will depend on the preset for
determination of systole/diastole (auto/manual) in the Set Up/
Preset Program page 3 as shown in Figure 4–84 and
Figure 4–85.
NOTE: If the Realtime Doppler Calculation option is installed
and activated, the user can choose to disable the automatic
transfer of the realtime results to the result window and report
page. Do this by selecting the manual calc option in page one
of the Advanced Vascular Calculation Sub-Menu.
.
% Stenosis
.
Summary of Contents for Logiq 500
Page 1: ......
