IEC Acoustic Output Tables
LOGIQ 500 Advanced Reference Manual
2276614–100 Rev. 0
6–111
Key to Tables (cont’d)
Parameter
Unit
Description
Maximum Power
mW
Maximum temporal-average power output. For scanning modes,
this shall be the total power output of all the acoustic pulses.
I
ob
mW/cm
2
Output beam intensity.
Power-up Mode
In systems in which the user defines the power-up mode, this
shall be stated as either “user defined” or “not applicable” (n/a).
Initialization Mode
In systems in which the user defines the initialization mode, this
shall be stated as either “user defined” or “not applicable” (n/a).
Acoustic Output
Freeze
If the system has acoustic output freeze, then this shall be stated
as “yes;” otherwise, it shall be stated as “no.”
I
tt
mm
Transducer to transducer-output-face distance.
I
ts
mm
Typical value for the transducer stand-off distance. If the trans-
ducer assembly is normally used in contact with the patient, then
this shall be specified “contact” system.
Table 6–144. Key to IEC Table Value (cont’d)
Summary of Contents for Logiq 500
Page 1: ......