Installation
KTC-XP1 UltraView Camera
6
1047441A / February 2004
2 I
NSTALLATION
2.1 M
AKING
V
IDEO
C
ONNECTIONS
Note:
With the Xposure technology, both the BNC (composite) and S-video (Y/C video)
connections provide sharper images of all scenes (especially high-contrast scenes). The
S-video connection, however, provides even greater clarity over the BNC connection.
See Figure 2 and perform the following:
Coaxial cable with BNCs
between MON.OUT and
test or local monitor
Coaxial cable with BNCs
between VIDEO OUT
and monitor, multiplexer,
or switcher
S-video cable between
S-VIDEO and monitor
Figure 2. Video connections
Note:
You can connect up
to three monitors (or
devices) to each camera.
1)
Connect a coaxial cable terminated with BNC connectors between
the MON.OUT connector of the camera and the video in connector
on a test or local monitor.
2)
Connect a coaxial cable terminated with BNC connectors between
the VIDEO OUT connector of the camera and the video in
connector on a monitor, multiplexer, switcher, or other standard
video device.
3)
Connect an S-video (Y/C video) cable between the S-VIDEO
connector of the camera and the video in connector on a high-
resolution surveillance monitor.
Note:
If you’re not seeing the video quality that you expect with the S-video
connection, consult your company’s S-video technician.
Summary of Contents for KTC-XP1
Page 1: ...KTC XP1 UltraView Camera With Xposure Technology ...
Page 24: ......
