Programming
KTC-XP1 UltraView Camera
14
1047441A / February 2004
CAMERA SETUP
SYSTEM NTSC
CAM_ID SETUP.
LIGHT CONTROL <AIS. >
SYNC LINELOCK.
AGC ON.
PREVIOUS PAGE...
To set the lens mode (light control):
At the Camera Setup menu, use
the up and down buttons (
)
to move to the Light Control option
and use the right and left buttons
(
) to move to and between
the light-control options (AIS or
AES).
The lens mode programming defaults provide optimal performance for
most applications. If you need to adjust the autoiris programming defaults,
however, two scales are available:
•
Level
for adjusting the gain when the autoiris lens begins to close.
•
Threshold
for adjusting the gain of the autoiris lens control signal.
Note:
The threshold adjustment for the AES mode is typically not needed unless color
bands are visible in very bright scenes. Raise the threshold to correct.
AIS MENU
LEVEL
MAX 90 MIN
THRESHOLD
MIN 0 MAX
PREVIOUS PAGE...
To adjust the level and threshold
defaults of a lens mode:
With the selected light control
option (lens mode) still highlighted
(AIS or AES), press the center
selection button ( ) to enter the
AIS or AES menu. At the AIS or
AES menu, use the up and down
buttons (
) to move between
the level and threshold scales and
use the right and left buttons
(
) to adjust the markers on
the scales
Move to the PREVIOUS PAGE
option and press to leave the
current menu.
Summary of Contents for KTC-XP1
Page 1: ...KTC XP1 UltraView Camera With Xposure Technology ...
Page 24: ......