Programming
KTC-XP1 UltraView Camera
18
1047441A / February 2004
•
Hold
: In the hold mode, the white balance color temperature is
computed as a reference at the moment HOLD is selected with the
center selection button ( ). This setting is best when the color
range remains constant.
The camera will maintain a white balance setting at the current color
temperature read within the range of 2000 – 11000 K.
MAIN MENU
CAMERA SETUP.
WHITE BALANCE <ATW >
LOCATIONS GENERAL
PTZ.
EXIT SAVE CHANGES.
To set the white balance mode:
At the Main Menu, use the up and
down buttons (
) to move to
the WHITE BALANCE option, use
the right and left buttons (
)
to move to and between the
options (ATW, ATW-WIDE, and
HOLD), then press the center
selection button ( ) to select the
option showing.
Note:
If selecting the Hold option, first fill the viewing area with a neutral background of
white or gray.
3.2.4 L
OCATIONS
(L
IGHTING
E
NVIRONMENTS
)
The location settings provide three presets and one customizable setting
for defining the lighting environment that the camera is viewing.
•
General
: Use this setting for high-contrast scenes where there is
no specific focus on lighter or darker areas.
•
Outside
: Use this setting for outdoor environments or high-
contrast scenes where the focus is on the darker areas of the
scene.
•
Office
: Use this setting for office environments using fluorescent
or tungsten lighting. This setting has the lowest maximum
dynamic range of the three preset settings.
•
Custom WDR
: Use the options of this setting to adjust the limits
of the dynamic range.
Summary of Contents for KTC-XP1
Page 1: ...KTC XP1 UltraView Camera With Xposure Technology ...
Page 24: ......