KTC-XP1 UltraView Camera
Programming
1047441A / February 2004
11
3.2.1 M
AIN
M
ENU
Camera Setup menu
Use these menus to configure signal format
(NTSC/PAL), camera ID (i.e., title), iris
settings, synchronization mode, and gain
control. See section
3.2.2 Camera Setup
.
White Balance
Use this menu to adjust the white balance.
See section
3.2.3
White Balance (ATW,
ATW-WIDE, HOLD)
.
Locations
Use this menu to program presets. See
section
3.2.4 Locations
.
PTZ
Use this menu to control the camera’s digital
PTZ functions. See section
3.2.5 PTZ
.
Exit
Use this option to exit the OSD programming
menus. See section
3.2.6 Exiting with Saving
or Canceling Changes
.
3.2.2 C
AMERA
S
ETUP
Use these menus to configure signal format (NTSC/PAL), camera ID
(i.e., title), iris settings, synchronization mode, and gain control.
To access the Camera Setup
menu:
At the Main Menu, use the up and
down buttons (
) to move to
the Camera Setup menu and
access it by pressing the center
selection button ( ).
MAIN MENU
CAMERA SETUP.
WHITE BALANCE ATW
LOCATIONS GENERAL
PTZ.
EXIT SAVE CHANGES.
Summary of Contents for KTC-XP1
Page 1: ...KTC XP1 UltraView Camera With Xposure Technology ...
Page 24: ......
