Programming
KTC-XP1 UltraView Camera
12
1047441A / February 2004
3.2.2.1 C
HANGING THE
S
IGNAL
F
ORMAT
CAMERA SETUP
SYSTEM <NTSC>
CAM_ID SETUP.
LIGHT CONTROL AIS.
SYNC LINELOCK.
AGC ON.
PREVIOUS PAGE...
To change the signal format:
At the Camera Setup menu, use
the up and down buttons (
)
to move to the System option
and use the right and left buttons
(
) to move to and between
the signal format options (NTSC
or PAL).
Note:
It will take a few seconds for the video
on the screen to stabilize to the new format.
3.2.2.2 A
DDING A
C
AMERA
ID
You can add a camera ID (i.e., title) of up to 12 characters that will
appear on the monitor screen. You can also give it an opaque
background to make it easier to see and position it on the screen to
avoid covering critical viewpoints.
To add a camera ID:
CAMERA SETUP
SYSTEM NTSC
CAM_ID SETUP.
LIGHT CONTROL AIS.
SYNC LINELOCK.
AGC ON.
PREVIOUS PAGE...
1)
At the Camera Setup menu,
use the up and down buttons
(
) to move to the
CAM_ID SETUP option and
press the center selection
button ( ) to access the
Camera ID Menu.
2)
At the Camera ID menu, use
the
,
,
,
,
and
OSD
buttons to perform the
following (see Figure 6):
CAMERA ID MENU
ID DISPLAY <OFF>
CAMERA ID:
ID POSITION UP-CENTER
ID BACKGROUND NONE
PREVIOUS PAGE...
Summary of Contents for KTC-XP1
Page 1: ...KTC XP1 UltraView Camera With Xposure Technology ...
Page 24: ......