Installation
KTC-XP1 UltraView Camera
8
1047441A / February 2004
2.3 A
TTACHING THE
C
USTOMER
-S
UPPLIED
L
ENS
Note:
For optimal performance, use an autoiris lens.
Refer to the instructions that came with the lens you purchased for
complete installation instructions of the lens.
In general, see Figure 4 and perform the following:
Video-type
autoiris
lens leads:
Pins for
solder side
of lens plug
C-mount adapter
(for C-mount lenses only)
Pins for
solder side
of lens plug
DC-type
autoiris
lens leads:
Red (9 VAC)
NC
(no connection)
Black (ground)
White (video)
Damping coil (+)
Damping coil (–)
Driving coil (+)
Driving coil (–)
Camera
Autoiris
lens
connector
Autoiris lens
plug
Lens
(autoiris lens shown;
a manual iris lens has no cable)
Figure 4. Attaching the customer-supplied lens
1)
If you are using a C-mount lens, screw on the provided C-mount
adapter.
2)
Screw the customer-supplied lens to the camera.
3)
If you are using an autoiris lens, insert the autoiris lens plug into the
autoiris lens connector.
Summary of Contents for KTC-XP1
Page 1: ...KTC XP1 UltraView Camera With Xposure Technology ...
Page 24: ......