manualshive.com logo in svg

GE Krautkramer USM 35X, Operator'S Manual

The GE Krautkramer USM 35X is a high-performance ultrasonic flaw detector. Ensure optimal operation and mastery of its features with the Operator's Manual, available for free download at manualshive.com. This comprehensive manual provides detailed instructions and insights, enabling users to maximize the benefits of this advanced product.

Share
Download
background image

0-6

Issue 01, 04/2005

Krautkramer  USM 35X

Contents

5.19 Distance-amplitude curve according

to JIS Z3060-2002 (only USM 35X DAC
and USM 35S) .......................................... 5-66

DACMOD (Activating DAC according
to JIS) ....................................................... 5-67

DACECHO (Recording reference curve) .... 5-68

BOLDLI (Choice of a registration curve) .... 5-70

T-CORR (Sensitivity correction) ................ 5-70

OFFSET (Distance of multiple DAC) ......... 5-70

Echo evaluation with DAC ......................... 5-71

5.20 Evaluation according to the DGS

method (only USM 35X S) ...................... 5-71

Measuring with DGS ................................. 5-71

Selecting the DGS mode .......................... 5-73

Default settings for the DGS
measurement ............................................ 5-73

Recording the reference echo and
displaying the DGS curve ......................... 5-75

Evaluation of reflectors ............................. 5-76

Transfer correction ..................................... 5-78

Sound attenuation ..................................... 5-78

Locks, error messages ............................. 5-81

Validity of the DGS method ....................... 5-81

6 Documentation .................................. 6-1

6.1 Printing data .............................................. 6-2

Preparing the printer .................................... 6-2

Preparing the USM 35X .............................. 6-2

Printing ........................................................ 6-3

6.2 Documentation with UltraDOC ................. 6-4

7 Maintenance and care ....................... 7-1

7.1 Care of the instrument .............................. 7-2

7.2 Care of the batteries .................................. 7-3

Care of the batteries .................................... 7-3

Charging the batteries ................................. 7-3

How to handle alkaline batteries .................. 7-4

7.3 Maintenance .............................................. 7-5

0-6

Issue 01, 04/2005

Krautkramer  USM 35X

Contents

5.19 Distance-amplitude curve according

to JIS Z3060-2002 (only USM 35X DAC
and USM 35S) .......................................... 5-66

DACMOD (Activating DAC according
to JIS) ....................................................... 5-67

DACECHO (Recording reference curve) .... 5-68

BOLDLI (Choice of a registration curve) .... 5-70

T-CORR (Sensitivity correction) ................ 5-70

OFFSET (Distance of multiple DAC) ......... 5-70

Echo evaluation with DAC ......................... 5-71

5.20 Evaluation according to the DGS

method (only USM 35X S) ...................... 5-71

Measuring with DGS ................................. 5-71

Selecting the DGS mode .......................... 5-73

Default settings for the DGS
measurement ............................................ 5-73

Recording the reference echo and
displaying the DGS curve ......................... 5-75

Evaluation of reflectors ............................. 5-76

Transfer correction ..................................... 5-78

Sound attenuation ..................................... 5-78

Locks, error messages ............................. 5-81

Validity of the DGS method ....................... 5-81

6 Documentation .................................. 6-1

6.1 Printing data .............................................. 6-2

Preparing the printer .................................... 6-2

Preparing the USM 35X .............................. 6-2

Printing ........................................................ 6-3

6.2 Documentation with UltraDOC ................. 6-4

7 Maintenance and care ....................... 7-1

7.1 Care of the instrument .............................. 7-2

7.2 Care of the batteries .................................. 7-3

Care of the batteries .................................... 7-3

Charging the batteries ................................. 7-3

How to handle alkaline batteries .................. 7-4

7.3 Maintenance .............................................. 7-5

Summary of Contents for Krautkramer USM 35X



































































































































































































































Reviews:

No comments

Related manuals for Krautkramer USM 35X

Oldham OX 2000 Use And Maintenance preview
OX 2000
Brand: Oldham Pages: 34
Energic Plus MPD-1007E Manual preview
MPD-1007E
Brand: Energic Plus Pages: 12
WATERGUARD V21I Installation Manual preview
V21I
Brand: WATERGUARD Pages: 2
Kipp & Zonen PAR lite Instruction Manual preview
PAR lite
Brand: Kipp & Zonen Pages: 32
Larson Davis SoundAdvisor NMS045 Reference Manual preview
SoundAdvisor NMS045
Brand: Larson Davis Pages: 64
Tenma 72-7228 Operating Manual preview
72-7228
Brand: Tenma Pages: 52
LORECa Hearing Instrument PKA87 User Manual preview
PKA87
Brand: LORECa Hearing Instrument Pages: 43
Suaoki PF3S Series User Manual preview
PF3S Series
Brand: Suaoki Pages: 79
J-TECH Solar Auxiliary Power Unit Operator'S Manual preview
Solar Auxiliary Power Unit
Brand: J-TECH Pages: 6
Lumel NA3 User Manual & Quick Start preview
NA3
Brand: Lumel Pages: 32
Hach BioTector B3500C User Manual preview
BioTector B3500C
Brand: Hach Pages: 165
GRAVITY TRAVELER 3D ARM Quick Start Manual preview
TRAVELER 3D ARM
Brand: GRAVITY Pages: 2
Skil ME9821-00 Owner'S Manual preview
ME9821-00
Brand: Skil Pages: 80
PKP DS02.1 Instruction Manual preview
DS02.1
Brand: PKP Pages: 20
Badger Meter ILR710 Installation And Operation Manual preview
ILR710
Brand: Badger Meter Pages: 18
Yamaha Pacifica Owner'S Manual preview
Pacifica
Brand: Yamaha Pages: 14
TE Connectivity 805M1 Operation Manual preview
805M1
Brand: TE Connectivity Pages: 5
JDS Uniphase 2297/02 Operating Manual preview
2297/02
Brand: JDS Uniphase Pages: 61

Brands by name

Popular brands

Load more brands