manualshive.com logo in svg

GE Krautkramer USM 35X, Operator'S Manual

The GE Krautkramer USM 35X is a high-performance ultrasonic flaw detector. Ensure optimal operation and mastery of its features with the Operator's Manual, available for free download at manualshive.com. This comprehensive manual provides detailed instructions and insights, enabling users to maximize the benefits of this advanced product.

Share
Download
background image

Krautkramer  USM 35X

Issue 01, 04/2005

0-1

Contents

1 Introduction ........................................ 1-1

1.1 Safety information ..................................... 1-2

Batteries ...................................................... 1-2

Software ...................................................... 1-2

Defects/errors and exceptional stresses ..... 1-3

1.2 Important information on

ultrasonic testing ...................................... 1-3

Preconditions for testing with
ultrasonic test equipment ............................ 1-3

Operator training .......................................... 1-4

Technical test requirements ........................ 1-4

Limits of testing .......................................... 1-5

Ultrasonic wall thickness measurement ...... 1-5

Effect of the test object’s material .............. 1-5

Effect of temperature variations .................. 1-6

Measurement of remaining wall
thickness .................................................... 1-6

Ultrasonic evaluation of flaws ..................... 1-6

Flaw boundary method ................................ 1-6

Echo display comparison method ............... 1-7

1.3 The USM 35X family .................................. 1-8

The different instrument versions ................ 1-8

Special features .......................................... 1-9

1.4 How to use this manual .......................... 1-10

1.5 Layout and presentation in this

manual ..................................................... 1-11

Attention and Note symbols ...................... 1-11

Listings ..................................................... 1-11

Operating steps ......................................... 1-11

2 Standard package and

accessories ........................................ 2-1

2.1 Standard package ..................................... 2-3

2.2 Recommended accessories ..................... 2-5

Krautkramer  USM 35X

Issue 01, 04/2005

0-1

Contents

1 Introduction ........................................ 1-1

1.1 Safety information ..................................... 1-2

Batteries ...................................................... 1-2

Software ...................................................... 1-2

Defects/errors and exceptional stresses ..... 1-3

1.2 Important information on

ultrasonic testing ...................................... 1-3

Preconditions for testing with
ultrasonic test equipment ............................ 1-3

Operator training .......................................... 1-4

Technical test requirements ........................ 1-4

Limits of testing .......................................... 1-5

Ultrasonic wall thickness measurement ...... 1-5

Effect of the test object’s material .............. 1-5

Effect of temperature variations .................. 1-6

Measurement of remaining wall
thickness .................................................... 1-6

Ultrasonic evaluation of flaws ..................... 1-6

Flaw boundary method ................................ 1-6

Echo display comparison method ............... 1-7

1.3 The USM 35X family .................................. 1-8

The different instrument versions ................ 1-8

Special features .......................................... 1-9

1.4 How to use this manual .......................... 1-10

1.5 Layout and presentation in this

manual ..................................................... 1-11

Attention and Note symbols ...................... 1-11

Listings ..................................................... 1-11

Operating steps ......................................... 1-11

2 Standard package and

accessories ........................................ 2-1

2.1 Standard package ..................................... 2-3

2.2 Recommended accessories ..................... 2-5

Summary of Contents for Krautkramer USM 35X



































































































































































































































Reviews:

No comments

Related manuals for Krautkramer USM 35X

Gardner Bender PM3000 Operating Instructions preview
PM3000
Brand: Gardner Bender Pages: 4
GAPS Clack WS1 Installation, Operation And Maintenance Manual preview
Clack WS1
Brand: GAPS Pages: 36
yellow jacket 68940 Operation Manual preview
68940
Brand: yellow jacket Pages: 26
Yamaha Disklavier Mark III Series Advanced Operation Manual preview
Disklavier Mark III Series
Brand: Yamaha Pages: 39
KALATEL CBR-KB3 Installation And Operation Manual preview
CBR-KB3
Brand: KALATEL Pages: 38
Vaisala HUMICAP HM70 Quick Manual preview
HUMICAP HM70
Brand: Vaisala Pages: 40
ProsKit MT-5110 User Manual preview
MT-5110
Brand: ProsKit Pages: 10
TQC Sheen SH1349 Operating Manual preview
SH1349
Brand: TQC Sheen Pages: 16
PCB Piezotronics 3711E1125G Installation And Operating Manual preview
3711E1125G
Brand: PCB Piezotronics Pages: 11
SBS SBS-600 Quick Start Manual preview
SBS-600
Brand: SBS Pages: 17
Aventics CAT R412026160 Operating Instructions Manual preview
CAT R412026160
Brand: Aventics Pages: 23
R&S EDS300 Getting Started preview
EDS300
Brand: R&S Pages: 43
JDS Uniphase 2297/02 Operating Manual preview
2297/02
Brand: JDS Uniphase Pages: 61
T&D TR-76Ui Getting Started Manual preview
TR-76Ui
Brand: T&D Pages: 2
Amazing Machinery Viztrac AM 200 User Manual preview
Viztrac AM 200
Brand: Amazing Machinery Pages: 18
TEKTROL Tek-Flux 1400A Instruction Manual preview
Tek-Flux 1400A
Brand: TEKTROL Pages: 31
Ralston Instruments LC20-TA Quick Start Manual preview
LC20-TA
Brand: Ralston Instruments Pages: 88
Oasis Scientific 2.8 User Manual preview
2.8
Brand: Oasis Scientific Pages: 13

Brands by name

Popular brands

Load more brands