manualshive.com logo in svg

GE Everest XLG3 VideoProbe, Operating Manual

Share
Download
GE Everest XLG3 VideoProbe Operating Manual Download Page 25

User Manual

Chapter 1 Introduction

17

Safety Information

Before using or servicing the system, you must read and understand the following safety 
information.

Symbols and Terms

When the following symbols and terms appear 

in this manual

, they have the following 

meanings:

When the following symbols appear 

on the product

, they have the following meanings:

Symbol

Term

Meaning

WARNING   

DANGEROUS VOLTAGE.

WARNING   

ELECTRICAL SHOCK HAZARD — PROPER GROUNDING 
REQUIRED.

WARNING   

Warning statements indicate conditions or practices that could 
result in injury or loss of life.

Caution   

Caution statements indicate conditions or practices that could 
result in damage to this product or other property.

Caution   

Surfaces may be hot.

Symbol

Meaning

Chassis grounding point.

See accompanying documentation.

Caution: Surfaces may be hot.

Fuse. For continued protection against fire, replace fuse only with specified 
type and rating.

Summary of Contents for Everest XLG3 VideoProbe







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands