GE Everest XLG3 VideoProbe Operating Manual Download Page 143

Page: 143 / 166

135

Agency Certifications

European Equipment Classification

Group 1, Class A

The

mark on this product indicates it has been tested to and conforms with the

provisions noted within the 2004/108/EC Electromagnetic Compatibility Directive.
The XLG3 system is in conformance with the following standards: 2004/108/EEC.

Declarations of Conformity are held by GE Inspection Technologies GmbH:

GE Inspection Technologies GmbH
Product Service Center
Lotzenäcker 4
72739 Hechingen Germany
Tel: +49(0) 74719882 0
Fax: +49(0) 74719882 16

Safety Mark

The XLG3 system is in compliance with the following standards: UL61010-1 and
CSA-C22.2 No. 61010-1.

Intrinsic Safety

The XLG3 system is not rated for intrinsically safe operation.

Summary of Contents for Everest XLG3 VideoProbe







































































































































































Search results

Summary of Contents for Everest XLG3 VideoProbe

Reviews:

Brands by name

Popular brands

GE Everest XLG3 VideoProbe, Operating Manual

Search results

Summary of Contents for Everest XLG3 VideoProbe

Reviews:

Brands by name

Popular brands