manualshive.com logo in svg

GE Everest XLG3 VideoProbe, Operating Manual

Share
Download
GE Everest XLG3 VideoProbe Operating Manual Download Page 132

124

Chapter 8 Maintenance

GE Inspection Technologies XLG3 VideoProbe System

To Charge the Battery

1.

Connect to power in one of these ways:

•

Battery installed

If the battery is installed in the base unit, plug the base unit into AC power. 
The battery charges whether the system is on or off.

•

Battery removed

If the battery is removed from the base unit, connect the charger’s DC power cord 
to the battery’s DC power cord. Then plug one end of the AC power cord into the 
charger and the other end into the AC outlet.

2.

Wait for the battery to charge.

The battery’s green LED flashes for a few seconds. Then it lights up solid and stays lit 
until the charge is complete. When the charge is complete, the green LED shuts off.

A fully discharged one-hour battery takes about four hours to charge. 

A fully discharged two-hour battery takes about eight hours to charge.

If the red LED lights up during this process, contact GE Inspection Technologies.

Charger

AC power cord

DC power cords

Summary of Contents for Everest XLG3 VideoProbe







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands