manualshive.com logo in svg

GE Everest XLG3 VideoProbe, Operating Manual

Share
Download
GE Everest XLG3 VideoProbe Operating Manual Download Page 128

120

Chapter 8 Maintenance

GE Inspection Technologies XLG3 VideoProbe System

Checking and Replacing the Fuses

If the system power switch is on but the system is not powering up, try the troubleshooting 
tips under 

“Power” 

on page 128. If necessary, check or replace fuses. Use the same fuse 

type and rating. For fuse values, see 

“Fuses” 

on page 131.

To Check or Replace the AC Fuses

1.

Turn off the power switch. Unplug the AC power cord from the base unit.

2.

Verify that the AC power cord and power source are both working properly. 

•

If not, fix the problem.

•

If so, go to Step 3.

3.

Squeeze the release tab on the AC fuse block, and remove the fuse block.

4.

Remove the fuses by pulling both out firmly. 

5.

Inspect each fuse. If the glass appears cloudy, the fuse is blown. Replace any blown 
fuse. 

6.

Reinsert the fuse block.

Caution   

If, after replacing a fuse, the new fuse blows, contact GE Inspection 

Technologies.

WARNING   

Before checking or replacing the AC fuses, always turn power switch 

off, and unplug AC power cord from the base unit. Exposure to live AC power 
could result in serious injury or death.

Release tab

Fuse block

GDB

GDB

AC fuses

Summary of Contents for Everest XLG3 VideoProbe







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands