GE Everest XLG3 VideoProbe Operating Manual Download

Page: 133 / 166

User Manual

Chapter 8 Maintenance

125

Replacing the Internal Memory Card

The internal memory card contains the operating system software as well as your image
and video files. You might want to replace the memory card, for example, to increase
storage capacity.

Only qualified electrical technicians should replace this card. This card is not user
serviceable.

To Replace the Internal Memory Card

Turn off all sources of power.

Turn off the power switch. Unplug AC power cord from power source. If a battery is
installed, unplug the DC power connector.

Unscrew and remove the access panel.

Eject the memory card.

Use a pen to push the button to the left of the drive.

Slide the new card into the drive. Push in gently to seat the card.

Reinstall the access panel.

Turn the system back on. Confirm that it starts correctly.

DC power connector

Internal memory card
access panel

Summary of Contents for Everest XLG3 VideoProbe







































































































































































Search results

Summary of Contents for Everest XLG3 VideoProbe

Reviews:

Related manuals for Everest XLG3 VideoProbe

Brands by name

Popular brands

GE Everest XLG3 VideoProbe, Operating Manual

Search results

Summary of Contents for Everest XLG3 VideoProbe

Reviews:

Related manuals for Everest XLG3 VideoProbe

Brands by name

Popular brands