GE Everest XLG3 VideoProbe Operating Manual Download

Page: 137 / 166

User Manual

Chapter 9 Troubleshooting

129

Software

DVD Recording

Storing Data to USB Thumb Drive

Condition

Causes

Actions

Time, date, or other settings are
lost when system is turned off.

Internal battery needs
replacing. (Normal life is five to
seven years.)

Return system to GE Inspection Technologies to have internal battery
replaced.

Condition

Causes

Actions

The XLG3 will not record to the
DVD.

You are not using validated
media.

• The XLG3 has been tested to work with only DVD-R and DVD+R

media.

• At the time of publication of this manual, only Sony and Verbatim

brands of DVD media have been validated. (Contact GEIT RVI
technical support for the latest listing of validated media and
accessories.)

Condition

Causes

Actions

The XLG3 will not record to a USB
thumb drive.

• You are not using a

validated USB thumb drive.

• The USB thumb drive

contains “U3” software files.
This “U3” software can
cause read/write errors on
the XLG3.

• At the time of publication of this manual, only specific brands of USB

thumb drive have been validated. (Contact GEIT RVI technical
support for the latest listing of validated media and accessories.)

• Sandisk (an approved USB thumb drive) has recently begun including

“U3” utility software on the thumb drive. The “U3” software must be
uninstalled on a PC before the thumb drive can be used with the
XLG3. An uninstall program can be downloaded from Sandisk:

http://u3uninstall.s3.amazonaws.com/U3Uninstall.exe

Summary of Contents for Everest XLG3 VideoProbe







































































































































































Search results

Summary of Contents for Everest XLG3 VideoProbe

Reviews:

Related manuals for Everest XLG3 VideoProbe

Brands by name

Popular brands

GE Everest XLG3 VideoProbe, Operating Manual

Search results

Summary of Contents for Everest XLG3 VideoProbe

Reviews:

Related manuals for Everest XLG3 VideoProbe

Brands by name

Popular brands