2018111-336 Rev. B
eBike III basic / comfort
- 51 -
1
2
3
4
s
addle
Motor
(
e
B
Ike
III
CoMfort
)
1. Follow the steps in “Remove housing of the eBike III
comfort“ on page 46.
2. Disconnect the two connection cables of the saddle
motor from PCB Interface SMU.
3. Remove the saddle.
4. Loosen and remove the bottom fixation of the saddle
motor; screw and nut are accessible via a hole at the
bottom.. Use a socket wrench and an Allen key from
the counter side to dismount the screw.
5. Unscrew the four screws of the saddle guide tube with
a fork wrench (13mm):
Start by removing screws (1) to (3) (see picture).
Loosen screw (4) and move the guide backwards until
the screw releases and can be removed.
Note
Try to position the saddle at mid-level setting before removing
the saddle motor.
Summary of Contents for eBike III basic Series
Page 2: ......
