GE eBike III basic Series, Service Manual

Page: 14 / 124

- 14 - eBike III basic / comfort 2018111-336 Rev. B
38. Check and clear the “NIBP error log file“ in service menu
(refer to „Error log“ on page 67)
pass/fail
39. Dynamic load calibration with test bench successfully performed?
(refer to „Dynamic Load Calibration“ on page 72)
pass/fail
40. Electrical saddle adjustment: adjust minimum and maximum saddle height
(refer to „Saddle Calibration“ on page 64)
pass/fail
41. Check torque values for screws
pass/fail
Electrical Safety Checks
42. Current leakage and ground continuity test results meet requirements?
Perform electrical safety checks when indicated (refer to „Electrical Safety“ on page 10).
All indicated electrical safetychecks require a pass/fail indication for steps performed.
Record the measurement values.
pass/fail