- 42 -
eBike III basic / comfort
2018111-336 Rev. B
r
eMove
HousIng
of
tHe
e
B
Ike
III
BasIC
r
eMove
top
Cover
1. Remove the saddle.
(When mounting the saddle after repair use a torque
wrench to tighten the screw with a
torque of
25 Nm
.)
2. Remove the lever for saddle height by turning it
counterclockwise.
3. Remove the two plastic caps (cap type 4) on both
sides.
4. Using a small screwdriver, cut into the plastic caps
covering the screws and remove the caps
(the caps will later be replaced by spare ones;
P/N 2018111-335).
5. Remove the two allen screws underneath the plastic
caps.
6. Remove the allen screw at the rear side of the top
cover.
Summary of Contents for eBike III basic Series
Page 2: ......
