GE DINAMAP ProCare 100, Service Manual

Page: 25 / 96

2-6 ProCare Partient Monitor Service Manual Revision A
2009381-001
Product Description: 2.3. Controls, Indicators, and Connectors
Front Panel
15 Silence icon: when Silence button is pressed after alarm sounds (silence
active), silence icon (bell) lights to indicate that audible alarms have been
silenced for 2 minutes.
16 Systolic window: 3-digit red LED indicates measured systolic Blood
Pressure in mmHg.
17 Diastolic window: 3-digit red LED indicates measured diastolic Blood
Pressure in mmHg.
18 Alarm volume indicator: lights to indicate you are making a change to the
alarm volume.
19 Pulse volume: illuminates to indicate you are making a change to the
pulse volume.
20 Inflate pressure: illuminates to indicate you are making a change to the
inflation pressure.
21 Pulse Rate window: 3-digit yellow LED shows the pulse rate in beats per
minute.
22 SpO
2
pulse indicator: Red LED bar flashes to indicate that real-time pulse
rate measurements are being derived from SpO
2
signals.
23 SpO
2
window: 3-digit red LED indicates oxygen saturation in %.
24 MAP/Cuff window: 3-digit red LED indicates measured MAP in mmHg
and shows instantaneous cuff pressure during BP determination.
25 Min window: Displays the BP mode if manual or STAT is the cycle time
when in Auto Cycle mode.
26 Battery power indicator: Green LED indicates the Monitor is operating on
battery power.
27 Low battery power indicator: Yellow LED indicates LOW charge status of
internal battery.
28 Charging indicator: Green LED indicates presence of external power
source and battery charging.
29 Temperature window: 4-digit red LED indicates measured temperature.