manualshive.com logo in svg

GE DASH 3000 V5, Quick Reference Manual

Share
Download
GE DASH 3000 V5 Quick Reference Manual Download Page 7

TAB
TRIM

COVER &
NON-TAB
TRIM

TAB
TRIM

COVER &
NON-TAB
TRIM

Monitor Applications

The bedside monitor can be used in

four different ways depending on

hospital need.  Differences between

each application will be apparent in

the monitor’s admit menu.

Standard

This application uses a monitor

mounted in a room.  It has only

hardwire capability and does not

accommodate telemetry.

■

To Admit a Patient

•

Select 

MORE MENUS

.

•

Select 

ADMIT MENU

.

•

Select 

ADMIT PATIENT

.

NOTE:

  The Admit key, on the front of the monitor, can also be

used to admit the monitor.

■

To Discharge a Patient

•

Remove all ECG leads from

the patient.

•

Select 

MORE MENUS

.

•

Select 

ADMIT MENU

.

•

Select 

DISCHARGE

PATIENT

.

•

Turn the Trim Knob to move

the cursor in front of

Discharge and press to select.

•

A message 

DISCHARGED

and 

ALL ALARMS OFF

 will

appear on the display when

the monitor is in a discharged

mode.

Summary of Contents for DASH 3000 V5










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands