manualshive.com logo in svg

GE DASH 3000 V5, Quick Reference Manual

Share
Download
GE DASH 3000 V5 Quick Reference Manual Download Page 63

TAB
TRIM

COVER &
NON-TAB
TRIM

TAB
TRIM

COVER &
NON-TAB
TRIM

■

Graphic Trends:

  Allows

graphic representation of data
over a specified period of time.

•

To Retrieve Graphical
Trended Information:

–

Select 

MORE MENUS

.

–

Select 

PATIENT DATA

.

–

Select 

GRAPHIC

TRENDS

.

–

An information window is
displayed with the graphic
trends that were last
selected.

–

Select 

MAIN MENU 

to

return.

■

View Older/View Newer:

  This

option moves the displayed date
either backward or forward in
time if data is available.

■

Select Parameters:

  This option

allows parameters to be chosen
for graphic trends display:

•

To Select Parameters:

–

Turn Trim Knob to
highlight 

SELECT

PARAMETERS

.

–

An information window is
displayed with all the
parameter options.

–

Turn Trim Knob and move
the cursor in front of the
desired parameter and
press to highlight.

–

Select up to three
parameters using these
same steps.

–

Move the cursor in front of

RETURN

 to close window.

–

Select 

MAIN MENU 

to

exit.

Summary of Contents for DASH 3000 V5










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands