manualshive.com logo in svg

GE DASH 3000 V5, Quick Reference Manual

Share
Download
GE DASH 3000 V5 Quick Reference Manual Download Page 20

TAB
TRIM

COVER &
NON-TAB
TRIM

TAB
TRIM

COVER &
NON-TAB
TRIM

■

View All ECG: 

Allows six leads

of ECG to be viewed on the
display.

•

To View All ECG:

–

Select 

ECG

.

–

Select 

VIEW ALL ECG

.

–

Six waveforms will be
displayed.

–

Press 

GRAPH GO/STOP 

to

print displayed leads.

–

Press the Trim Knob to
remove displayed leads.

–

Select 

MAIN MENU 

to

exit.

■

Arrhythmia: 

Arrhythmia

processing can be manually
changed to one of the following
conditions:

•

Full: 

Expands detection to all

arrhythmia conditions
defined by the software level.

•

Lethal: 

Arrhythmia

processing is limited to
Asystole, VFib/VTac and
VTach.

•

Off: 

Disables all arrhythmia

alarms.  Parameter alarms
remain active.

•

To Change the Arrhythmia
Processing Mode:

–

Select 

ECG

.

–

Select 

ARRHYTHMIA

.

–

Turn the Trim Knob to
move the cursor in front of
the desired arrhythmia
processing mode and press
to select.

–

Select 

MAIN MENU 

to

exit.

Summary of Contents for DASH 3000 V5










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands