manualshive.com logo in svg

GE DASH 3000 V5, Quick Reference Manual

Share
Download
GE DASH 3000 V5 Quick Reference Manual Download Page 60

TAB
TRIM

COVER &
NON-TAB
TRIM

TAB
TRIM

COVER &
NON-TAB
TRIM

■

Alarm Volume:

  The alarm tone

volume can be adjusted at the
bedside.

•

To Adjust Alarm Tone
Volume:

–

Select 

MORE MENUS

.

–

Select 

ALARM

CONTROL

.

–

Select 

ALARM VOLUME

.

–

Turn the Trim Knob to the
desired alarm tone and
press to select.

–

Select 

MAIN MENU

 to

exit.

NOTE:

  The alarm volume at the bedside monitor does not

affect the alarm volume at the central station.

NOTE:

  A minimum alarm volume can be set up in the monitor

defaults.

■

Clear Alarms:

  Allows for any

alarm information displayed in
the alarm parameter window to
be cleared from the display.

•

To Clear Alarms:

–

Select 

More Menus

.

–

Select 

Alarm Control

.

–

Select 

Clear Alarms

.

–

Information from the alarm
parameter window is
removed.

NOTE:

  Arrhythmia alarms are not deleted and can be found in

the Alarm History.

■

Alarm History:

  See Patient

Data Tab.

■

Display Off/Alarm Pause:

  This

option allows the user to
disconnect the patient from the
monitor for an extended period
of time.  There are several alarm
pause choices available:

•

Display Off/Alarm Pause:

This option turns off the
bedside monitor and pauses
the alarms at both the bedside
and the central station for an
indefinite period of time.

•

Monitor Pause:

  This option

turns off the bedside monitor,
but allows alarm notification
to remain active at the central
station.

•

To Activate the Display Off/
Alarm Pause Feature:

–

Select 

MORE MENUS

.

–

Select 

ALARM

CONTROL

.

–

Select 

DISPLAY OFF/

ALARM PAUSE

.

–

Move the cursor in front of
the desired alarm pause
choice and press to select.

–

The display screen is now
paused.

–

Press the Power button on
the monitor to reactivate
the display and alarms.

NOTE:

  Pressing the Power Button will turn the Dash display off

and stop communication with the Central Station.  Depending
on your configuration, a NO COMM alarm may sound.

Summary of Contents for DASH 3000 V5










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands