GE CGA 351, User Manual

Page: 69 / 133

December 2004
4-30 Setup and Calibration
Setting the Security Levels
To set up the menu security levels, enter the User Program as
described on page 4-1 and proceed as follows:
Note:
The
[User]
and
[Setup]
options also appear in the above list
box.
Because these menus are intended for factory use only, specific
programming instructions are not presented here. However, the
general purposes of these menus are as follows:
•
Lock Menus: this option permits the setting of the security level
for any of the individual submenus.
•
Lock All: this option institutes password protection for all
submenus simultaneously.
•
Versions: this option displays the software versions for each of the
system components.
After responding to any of the above options, the meter now
automatically returns to the “Opt” prompt. This completes the setting
of the option slots and the security levels. Either press
[ESC]
until you
exit the User Program or proceed to the appropriate section of this
chapter to continue programming the meter.
Cfg Cal Opt Disp Use the [ ] and [ ] keys to
select
[Opt]
and press
[ENTER]
.
POWER ESC ENTER
Cfg Cal Opt Disp Use the [ ] and [ ] keys to
select the desired option and
press
[ENTER]
.
Lock Menus
Lock All
Versions
POWER ESC ENTER
www.DataSheet4U.com
www.DataSheet4U.com