GE CGA 351, User Manual

Page: 33 / 133

Operation 3-5
December 2004
Configuration Options
Note:
The
[CJC Temp]
and
[Duty Cycle]
options are also available in
the above list box.
If either of the Temperature inputs is selected for display, °C and °F
are available as the unit types. For the Sensor and Duty Cycle inputs,
mV and pcnt, respectively, are the only available unit types.
Cfg Cal Opt Disp Upon entering the User Pro-
gram , the
[Cfg]
option is
already selected. Simply press
[ENTER]
. (Notice that the
[Disp]
option is grayed out at this
time.
POWER ESC ENTER
Cfg Cal Opt Disp To proceed with the
[1: Cfg]
option, press
[ENTER]
. To abort
the operation, press
[ESC]
.
1: Cfg
POWER ESC ENTER
From 1: Cfg A list of the available display
inputs is shown. Use the [
]
and [ ] keys to select the
desired input and press
[ENTER]
. Oxygen has been
selected as an example.
Oxygen
Temperature
Sensor
POWER ESC ENTER
From 1: Cfg Oxygen A list of the available unit
types is shown. Use the [
]
and [ ] keys to select the
desired units ( parts per million
or percent ) and press
[ENTER]
.
ppm
pcnt
POWER ESC ENTER
From 1: Cfg Ox..pcnt A list of the available output
devices is shown. Follow the
instructions below to select the
desired outputs.
*0: Display
*0: Fault Alarm
Add Remove OK Cancel
POWER ESC ENTER
www.DataSheet4U.com
www.DataSheet4U.com