GE CGA 351, User Manual

Page: 51 / 133

December 2004
4-12 Setup and Calibration
Setting the Integration
Time
Caution!
Improper temperature controls settings can seriously
degrade the performance of the instrument.
Never change these settings without specific instructions
from GE Infrastructure Sensing.
Enter the temperature control menu, as described on page 4-8, and
proceed as follows:
Note:
See page 1-6 for a discussion of the integration time.
Note:
The
[Setpoint]
,
[Max.Duty Cycle]
and
[Defaults]
options are
also available in the above list box.
At the next prompt, enter the desired value for the integration time.
The meter now automatically returns to the “Temp. Control” prompt.
Either press
[ESC]
until you exit the User Program or proceed to the
appropriate section to continue setting up the temperature control.
Temp-Cntrl Use the [ ] and [ ] keys to
select [Int Time] and press
[ENTER]
.
Air Offset
Prop Band
Int Time
POWER ESC ENTER
Temp-Cntrl Int-Time Using the [ ] and [ ] keys,
position the cursor under the
desired character. Then, use
the [
] and [ ] keys to incre-
ment the value. When done,
press
[ENTER]
.
Int Time
0000
s
POWER ESC ENTER
Tem..Unit-Measuring This message indicates that
changes in this menu will alter
the live data output. To accept
the new value, use the [ ] and
[ ] keys to select
[Yes]
and
press
[ENTER]
.
Unit measuring
Accept changes?
Yes No Cancel
POWER ESC ENTER
www.DataSheet4U.com
www.DataSheet4U.com