GE Brivo OEC 715 Operator'S Manual Download Page 130

Page: 130 / 210

Brivo OEC 715/785/865 Mobile C-Arm X-Ray Product

Page 6-23

Click

“

Add

”

button to display the MPPS Server Config screen. Obtain the following information about the

MPPS server from your network administrator and enter it on this screen:

Alias:

Unique name, internal to WorkStation, used to identify the server in the list of available destination

devices.

AE Title:

DICOM Application Entity Title.

IP Address:

Unique IP address assigned to the server you are configuring.

Port Number:

Port number assigned to the query server.

Time Out:

The time in seconds that the Workstation waits for a response from the server before timing out.

Summary of Contents for Brivo OEC 715



















































































































































































































Search results

Summary of Contents for Brivo OEC 715

Reviews:

Brands by name

Popular brands

GE Brivo OEC 715, Operator'S Manual

Search results

Summary of Contents for Brivo OEC 715

Reviews:

Brands by name

Popular brands