GE ApexPro, Operator'S Manual

Page: 34 / 218

2-4 ApexPro™ 2001989-200E
Equipment overview
CIC Pro center
The CIC Pro center displays real-time data acquired from up to 16 networked GE
monitors or transmitters. The CIC Pro center displays this telemetry bed patient data
along with the patient data acquired from other monitors. The transmitter number is
displayed under the
ECG parameter window.
The CIC Pro center is also used to define telemetry defaults. For more information,
refer to
System setup on page 4-1 .
Optional components
Apex oximeter
CAUTION
Do not use the Apex oximeter on neonatal patients. It is not designed
for use on neonates.
An Apex oximeter can be connected to a transmitter in order to monitor the patient’s
pulse oximetry data and send the SpO2 data for display at the CIC Pro center. Only
digital data is available; no waveforms are generated or transmitted. Digital data is
stored in
Graphic Trends and Vital Signs . For setup information, refer to Apex
oximeter on page 3-8 .
Xpod oximeter
CAUTION
Do not use the Xpod oximeter on neonatal patients. It is not
designed for use on neonates.
An Xpod oximeter can be connected to a transmitter in order to measure arterial
oxygen saturation (SpO2), peripheral pulse rate (PPR), and perfusion quality and send
the data for display at the CIC Pro center. For setup information, refer to
Xpod
oximeter on page 3-7 .
Accutracker DX noninvasive blood pressure (NBP) monitor
NOTE
The Accutracker DX noninvasive blood pressure monitor has been modified by
SunTech Medical Instruments to operate with the ApexPro system.
An Accutracker DX noninvasive blood pressure monitor can be connected to a
transmitter in order to measure the systolic and diastolic blood pressure. The
transmitter sends the measurement data for display at the CIC Pro center. Digital
values are stored in
Graphic Trends and Vital Signs . For setup information, refer to
Accutracker DX on page 3-10 .