GE AL-1103 User Manual Download

Page: 4 / 76

Alliance system

User Manual

Restricted rights legend.

The Licensed Product is provided with RESTRICTED RIGHTS. In the

event the United States Government or an agency thereof is granted a license, the following

additional terms apply: Restricted Computer Software, as defined in the Commercial

Computer Software–Restricted Rights clause at Federal Acquisition Regulations 52.227-19,

and the restrictions as provided in subparagraphs (c)(1) and (c)(2) thereof; and as applicable,

the Government’s rights to use, modify, reproduce, release, perform, display, or disclose the

Software also are restricted as provided by paragraphs (b)(2) and (b)(3) of the Rights in

Noncommercial Technical Data and Computer Software–Small Business Innovative

Research (SBIR) Program clause at DFARS 252.227-7018.

YOU ACKNOWLEDGE THAT YOU HAVE READ AND UNDERSTAND THIS AGREEMENT AND AGREE

TO BE BOUND BY ITS TERMS. YOU FURTHER AGREE THAT THIS AGREEMENT IS THE COMPLETE

AND EXCLUSIVE STATEMENT OF THE AGREEMENT BETWEEN YOU AND GE SECURITY, AND

SUPERSEDES ANY PROPOSAL OR PRIOR AGREEMENT, ORAL OR WRITTEN, AND ANY OTHER

COMMUNICATION RELATING TO THE SUBJECT MATTER OF THIS AGREEMENT.

Intended use

Use this product only for the purpose it was designed for; refer to the data sheet and user

documentation. For the latest product information, contact your local supplier or visit us online

www.gesecurity.com

Summary of Contents for AL-1103













































































Search results

Summary of Contents for AL-1103

Reviews:

Related manuals for AL-1103

Brands by name

Popular brands

GE AL-1103, User Manual

Search results

Summary of Contents for AL-1103

Reviews:

Related manuals for AL-1103

Brands by name

Popular brands