Alliance System
User Manual
56
System menu option 17, Enable/disable service technician
Use this menu to enable and disable the service technician’s code. This menu is to be used when a service
technician or engineer can only gain access to the installer programming menu when this option has been
enabled.
Enable/disable the service technician code
To enable/disable the service technician code, do the following:
System menu option 18, Reset cameras
Use this menu to reset the film frame count to zero for all camera or change the film frame count on an
individual camera.
Reset the film frame count
To reset the film frame count, do the following:
1. Press
MENU*
Figure 1
), enter your user
PIN code, and press
ENTER
Figure 1
).
2. Enter
17
and press
ENTER
. The keypad
displays the enable/disable the service
technician code opening screen (
Figure 90
).
3. Enter one of the options listed in
Table 27
.
Figure 90. Enable/disable service technician code
Table 27. Enable/disable the service technician code options
Enable the service technician’s code for the programmed time
period, and exit this menu option.
Enter
1
and press
ENTER
.
Cancel the service technician’s code, and exit this menu option.
Enter
0
and press
ENTER
.
Exit this menu option.
Press
ENTER
.
Exit the menu option and return to the original display.
Press
CLEAR
.
1. Press
MENU*
Figure 1
).
2. Enter your user PIN code and press
ENTER
Figure 1
).
3. Enter
18
and press
ENTER
. The keypad
displays the reset camera opening screen
(
Figure 91
).
Figure 91. Reset camera opening screen
0-Cancel, 1-Service in
Option:
Reset Camera Counts 0-All
Camera No:
Summary of Contents for AL-1103
Page 1: ...Alliance System User Manual ...
Page 28: ...Alliance System User Manual 22 ...
Page 72: ...Alliance System User Manual 66 ...
Page 76: ......
