Chapter 2
Alliance system menu
55
System menu option 16, Bypass/unbypass RAS/DGP
Use this menu to bypass Remote Arming Stations (RAS) and Data Gathering Panels (DGP). Fault, tamper, and
system alarm messages from bypassed RAS or DGP are excluded from the security system.
Use this menu if a RAS or DGP has generated a system alarm, or is out of service, and needs to be bypassed
while awaiting service.
Bypass/Unbypass RAS/DGP
To Bypass/Unbypass RAS/DGP, do the following:
1. Press
MENU*
Figure 1
), enter your user
PIN code, and press
ENTER
Figure 1
). The
keypad displays the Bypass/Unbypass RAS/
DGP window (
Figure 87
).
2. Enter
16
(for menu 16) and press
ENTER
.
Figure 87. Enter Access Code screen
3. Enter
1
for RAS (
Figure 88
) and
2
for DGP
(
Figure 89
) and press
ENTER
Note:
Bypassing a DGP does NOT bypass the
alarm zones on that DGP, but does disable
DGP off-line/on-line reporting (tamper
switch).
Note:
Bypassing a RAS or DGP also resets any
system alarms generated by the RAS or
DGP
4. Enter the RAS/DGP number to be bypassed
and press
ENTER
.
If the number entered is not recorded, it is
added and displayed (bypassed).
If the number entered is already recorded, it
is deleted and removed from the display
(unbypassed).
5. Press
ENTER
to exit this menu.
Figure 88. Bypass/Unbypass RAS
Figure 89. Bypass/Unbypass DGP
1-RAS, 2-DGP Bypass/Unbypass
0-Exit, Menu:
No RAS Are Bypassed
Bypass RAS:
No DGPs Are Bypassed
Bypass DGP:
Summary of Contents for AL-1103
Page 1: ...Alliance System User Manual ...
Page 28: ...Alliance System User Manual 22 ...
Page 72: ...Alliance System User Manual 66 ...
Page 76: ......
