Chapter 2
Alliance system menu
51
Entering a user pin code
The display shows the user’s PIN code if the user number is 1000 or less. This feature must be programmed by
the installer to authorize access.
Note:
You cannot program a PIN code that already exists, one that will conflict with another user’s duress code (refer to
Section 4, Duress Signal), or one that conflicts with another user’s door code (See
System menu option 22, Open doors
on
page 59).
To enter a user pin code, do the following:
System menu option 15, Time and date
Use this menu to program a new time and date. The time and date are visible during normal use of the Alliance
system and all internal functions rely on them.
A new date or time only needs to be programmed when the Alliance system is first installed, or if the time
needs to be adjusted for daylight saving time.
1. Press
ENTER
Figure 1
). The keypad
displays the enter a user pin code window
(
Figure 71
).
2. Enter the PIN code for the user and press
ENTER
.
Note:
A user, who is allowed to both open doors
and arm/disarm the system, should have a
PIN code of at least five digits. See
System
menu option 22, Open doors
on page 59.
.
Figure 71. Enter user pin code
3. Enter the PIN code again (
Figure 72
) to
confirm and press
ENTER
.
Note:
Update your “User” list when changes are
made.
Figure 72. Confirm user pin code
PIN Code: 1234
Press ENTER:
PIN Code:
Code:
Confirm PIN Code
Code:
Summary of Contents for AL-1103
Page 1: ...Alliance System User Manual ...
Page 28: ...Alliance System User Manual 22 ...
Page 72: ...Alliance System User Manual 66 ...
Page 76: ......
