GE AL-1103, User Manual

Page: 55 / 76

Chapter 2
Alliance system menu
49
Entering a user name
Systems not programmed for user flags, or those with user numbers less than 200, display the user’s name as
follows:
Note: You cannot create a user unless your alarm group authorizes you to do so.
Table 25. Disarm test menu options.
Option Description Display
Two Cards If set to YES, the user will always require a second valid user code/card to
be entered to perform any alarm or access control functions at doors 17
to 64.
YES – Two Cards
*-Change, 0-Skip
Guard If set to YES, the user’s code/card can only perform functions at doors 17
to 64 when used in conjunction with a “Visitor” code/card
YES – Guard
*-Change, 0-Skip
Visitor If set to YES, the user’s code/card can only perform functions at doors 17
to 64 when used in conjunction with a “Guard” code/card.
YES – Visitor
*-Change, 0-Skip
Trace User If set to YES, all alarm and access functions performed by the user at
doors 17 to 64, will leave a “Trace” message to be sent to the
management computer.
YES – Trace User
*-Change, 0-Skip
Card Only If set to YES, the user will not be able to use a PIN code.
YES – Card Only
*-Change, 0-Skip
Privileged If set to YES, the user’s code/card will over-ride any “Anti-Passback”
restrictions on doors 17 to 64.
YES – Privileged
*-Change, 0-Skip
Extended
Access If set to YES, the user will be allowed extended door access times at doors
17 to 64 (e.g. to allow the door to remain open longer for disabled access).
YES – Extended Access
*-Change, 0-Skip
Your Name is Ann Brown, (*)-End
Ann Brown