Alliance System
User Manual
14
Programmed not to display areas assigned to your PIN code
All armed areas are automatically disarmed if your system has not been programmed to display the areas
assigned to your PIN code and the zones were not programmed for tamper. The display returns to that shown
above.When the disarming procedure has been successful the AL-1103 area LED goes off, and the AL111x
LED goes from red to green.
Programmed to display areas assigned to your PIN code
If a list of the areas assigned to your PIN code is displayed, all armed areas are now listed. For example:
Table 5
lists the display options.
Table 5.
Disarm the system display options
Option
Action
Disarm all areas at once and return to the original display.
Enter
0
and press
ENTER
(
Figure 1
)
.
Disarm the selected area. If there are more armed areas, they
will display.
Enter area number and press
ENTER
. When finished
disarming, press
ENTER
again.
Exit and return to the original display. Areas already disarmed
will stay disarmed.
Press
CLEAR
(see
Figure 1
)
.
Display the next armed area in the list. You can then select an
area to be disarmed, or continue to press
ON/NEXT
to scroll.
Press
ON/NEXT
(see
Figure 1
)
.
0-ALL 1, Office 2, Boardroom
Enter Area:
Summary of Contents for AL-1103
Page 1: ...Alliance System User Manual ...
Page 28: ...Alliance System User Manual 22 ...
Page 72: ...Alliance System User Manual 66 ...
Page 76: ......
