manualshive.com logo in svg

GE 845, Instruction Manual

Share
Download
GE 845 Instruction Manual Download Page 98

3–24

845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL

SOFTWARE INTERFACE

CHAPTER 3: INTERFACES

3.

Expand the 

Setpoints > Device > Front Panel

 list item and double click on 

Display 

Properties

 or 

Default Screens

 to open the settings window as shown:

4.

The settings window opens with a corresponding status indicator on the lower left of 
the window.

5.

If the status indicator is red, verify that the serial, USB, or Ethernet cable is properly 
connected to the relay, and that the relay has been properly configured for 
communications (steps described earlier).

The settings can now be edited, printed, or changed. Other setpoint and command 
windows can be displayed and edited in a similar manner. "Actual Values" windows are 
also available for display. These windows can be arranged, and resized, if desired.

Working with Setpoints & Setpoints Files

FASTPATH: 

When a settings file is being uploaded to a device, the DEVICE IN SERVICE state (Setpoints > 
Device > Installation) switches to "Not Ready" for the duration of the upload. This ensures 
that all new settings are applied before the device is operational. Settings file upload 
operations include both 1) Enervista 8 Series Setup software menu option "Write Settings 
File to Device" and 2) saving Logic Designer changes online.

Individual setting changes from the device front panel or Enervista 8 Series Setup software 
Online Window do not change the DEVICE IN SERVICE state.

Summary of Contents for 845









































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands