GE Security TruVision DVR 60 User Manual Download Page 72

Page: 72 / 148

8BChapter 9: Archiving recorded files

TruVision DVR 60 User Manual

Exporting recorded files to a backup device

You can insert a mini-USB hub to the USB port to attach a mouse for navigation and
a USB drive for archiving. However, the unit may not support all types of USB hubs.

Figure 32: Export screen

Table 14: Description of the Export screen

Item

Function

Description

Refresh

Refresh the search results if any parameters have been modified.

Media

Select one of the storage media for archiving: USB flash drive, USB
HDD, or DVD writer). If the backup device is not recognized:

• Click the Refresh button.

• Reconnect device.

• Check for compatibility from vendor.

Free space

Free space available on the backup device is displayed.

File

Files found on the backup device are listed.

New

Create new folder.

6. Delete

Delete

selected

file.

Play

Play selected file.

Format

Format the USB/eSATA drive.

Start

Start downloading selected files onto storage medium.

10.

Cancel

Cancel search and return to previous menu.

Summary of Contents for TruVision DVR 60





















































































































































Search results

Summary of Contents for TruVision DVR 60

Reviews:

Related manuals for TruVision DVR 60

Brands by name

Popular brands

GE Security TruVision DVR 60, User Manual

Search results

Summary of Contents for TruVision DVR 60

Reviews:

Related manuals for TruVision DVR 60

Brands by name

Popular brands