GE Security TruVision DVR 60, User Manual

Page: 65 / 148

7BChapter 8: Playing back a recording
TruVision DVR 60 User Manual 59
To hide the playback control panel during playback, right-click the mouse and
select the Control Panel button in the playback control panel.
9. When playback has finished, click Exit to the Search screen. Another search result
can be selected.
To playback from more than one camera:
1. In live mode select the camera display for playback.
2. Press the Search button on the remote control or front panel, or right-click the
mouse and select the Advanced Search button. The Advanced Search screen
appears.
3. Analog and/or IP Camera Status lines use the joystick to move the cursor to a
camera check box and press Enter to select the desired cameras. You can also
use the mouse to click a camera’s check box.
4. Using the joystick, move the cursor to each of the search parameters and select
the options required. In the option box press Enter on the front panel to accept
the change. You can also use the mouse to modify the parameters.
5. Click the Search button. The list of search results appears.
6. Using the joystick, move the cursor to the first line of the search results and press
Enter to select. The line is highlighted green. To select a different search result line,
move the cursor to the desired line and press Enter again.
You can also use the mouse to select a search result line.
Note: Only one line can be selected.
7. Click the Play button. The Synchronous Playback Cameras screen appears which
lists all the selected cameras. (The example below shows analog cameras only.)
8. Select up to four analog or two IP cameras to playback simultaneously and press
the OK button.
The selected cameras play back immediately.
9. To stop playback, right-click the mouse and select the Exit button in the playback
control panel.
To hide the playback control panel, right-click the mouse and select the Control
Panel button in the playback control panel.