GE Security TruVision DVR 60, User Manual

Page: 90 / 148

10BChapter 11: Configuring recording settings
84 TruVision DVR 60 User Manual
5. Click and check Enable Schedule.
6. Select the day of the week for which you want to set up the schedule or select All
Week to set up the schedule for the entire week.
You can define a schedule for each day of the week.
7. Set the start and end time for recording.
Define a time period by entering a start (left column) and end (right column) time.
You can schedule up to eight time periods. Click All Day to record all day.
Note: Time periods defined cannot overlap.
8. Select a recording type.
This setting instructs the DVR to begin recording when an alarm is triggered. The
recording type can be based on time and triggered by motion detection and/or an
alarm.
9. Select a recording parameter.
Recording parameters include Scheduled or TimeLapse. If set to Scheduled, the
DVR records based on the schedule defined. If set to TimeLapse, the DVR records
continuously.
10. Click OK to finish configuration.
11. Repeat steps 3 to 9 for other cameras or copy the schedule settings from one
camera to another.
To copy the current schedule settings to another camera, select a camera from
the Copy To dropdown list, and then click Copy.
12. Click OK to finish and save the schedule settings.
Protecting recorded files
There are two methods to prevent recorded files from being inadvertently overwritten
or deleted off the HDD. We highly recommend that important recorded events be
protected from deletion. Recorded files can either be
locked or the HDD that the files
reside on can be set to read only .