GE Security TruVision DVR 60 User Manual Download Page 119

Page: 119 / 148

TruVision DVR 60 User Manual

113

Chapter 15

HDD management

Initializing HDDs

The TVR 60 is shipped with the in-built HDD already initialized. You can re-initialize the
HDD. However, all data on the HDD will be destroyed.

To initialize a HDD:

1. Enter the HDD Management screen by clicking System in the main menu, and

then Hard Disk.

2.  Select the HDD to be initialized.
3.  Click the Init button.
4.  Click OK to begin initialization.

After the HDD has been initialized, the status of the HDD changes from Abnormal
to Normal.

Setting HDD groups

Your DVR can organize multiple HDDs into groups. Videos from specified channels
can be set to be recorded onto a particular HDD group.

Summary of Contents for TruVision DVR 60





















































































































































Search results

Summary of Contents for TruVision DVR 60

Reviews:

Related manuals for TruVision DVR 60

Brands by name

Popular brands

GE Security TruVision DVR 60, User Manual

Search results

Summary of Contents for TruVision DVR 60

Reviews:

Related manuals for TruVision DVR 60

Brands by name

Popular brands