GE Security TruVision DVR 60 User Manual Download

Page: 91 / 148

10BChapter 11: Configuring recording settings

TruVision DVR 60 User Manual

Locking and unlocking recorded files

Lock files to protect them against being overwritten or deleted.

To lock or unlock a recorded file:

1. Enter the Video Search screen by pressing the Search button on the front panel or

remote control, and then enter Advanced Search.

2. Search for the desired recording by entering search parameters.

Search parameters include Camera #, Video Type, Protected status, and Start/End
Date/Time.

3. Click Search.

A list of recordings, similar to the figure below, matching the search parameters
displays.

4. Select the file you want to lock/unlock.
5. Click Lock to lock file.

The Locked column indicates whether a file is locked or not. Closed lock icons
indicate locked files while opened lock icons indicate unlocked files. The Lock
button toggles between Lock and Unlock, depending on the file.

6. Click Cancel to exit out of the Video Search menu.

Summary of Contents for TruVision DVR 60





















































































































































Search results

Summary of Contents for TruVision DVR 60

Reviews:

Related manuals for TruVision DVR 60

Brands by name

Popular brands

GE Security TruVision DVR 60, User Manual

Search results

Summary of Contents for TruVision DVR 60

Reviews:

Related manuals for TruVision DVR 60

Brands by name

Popular brands