background image

 

9BChapter 10: Using the Web browser 

TruVision DVR 60 User Manual 

77 

Searching for event logs 

The DVR compiles a log of events, such as the start or end of video recording, DVR 
notificatons, and alarms, through which you can easily search. Logs are categorized 
by the following types: 

• Alarm:

 Includes motion detection, tamper detection, video tampering, and other 

alarm events 

• Notifications:

 Includes system notifications such as video loss, HDD failures, and 

other system-related events 

• Operations:

 Includes users access to the Web interfaces and other operational 

events 

• Information:

 Includes general information on the DVR actions, such as the start 

and end of video recording, etc. 

To search for logs, click Log on the menu bar, select a log type, specify a date and 
time range, and then click Search. 

Live dual streaming 

The TVR 60 allows you to view from up to 16 cameras over a network. Dual streaming 
allows high quality video to be viewed in one stream (Stream A) and lower quality 
video to be viewed in another stream (Stream B) that can be easily streamed through 
a narrow bandwidth. 
Dual streaming is only available in live mode using the browser. You cannot record. 

To access live dual streaming via the browser: 

1.   In the Web browser interface right-click the mouse on the video image.  

A pop-up box appears asking about dual stream selection. 

2.  Select main or substream option. 

Controlling a PTZ dome camera in the Web 

browser 

The Web browser interface lets you control the PTZ functions of a dome camera. Click 
on a PTZ dome camera and use the PTZ controls on the interface to control the PTZ 
functions. 

Summary of Contents for TruVision DVR 60





















































































































































Reviews: