GE Security SymDec 16 plus 4, User Manual

Page: 53 / 152

Chapter 4
Programming the SymDec 16 plus 4
43
Recording
Use this menu to select the camera type, recording input, IP address, and record mode of the IP camera or
video stream. You can also use this menu to enable or disable the covert feature of the IP camera selected.
These options vary according to the camera type selected.
Figure 21. The IP Camera/Recording menu
Table 18. Cameras/Recording options
Menu Setting Options
Camera Type SymProtcol, ACTi 2.0, GE CamPlus
Record Input Live, Disable, Live + Record
Username Press enter to launch virtual keypad to input username (not available for SymProtocol)
Password Press enter to launch virtual keypad to input password (not available for SymProtocol)
Streaming TCP Only, RTP (UDP) (not available for SymProtocol)
Source/IP Address IP address of selected camera
Video Port 6001 (not available for SymProtocol)
Stream Port 6002 (not available for SymProtocol)
HTTP Port 80 (not available for SymProtocol)
RTSP Port 7070 (not available for SymProtocol)
Record Mode Always, Alarm only, Event + Alarm
Covert Enable or disable. Covert means the camera is recording but the display is turned off.