Chapter 1
Introduction
7
Passwords
Passwords are provided to limit access to the SymDec 16 plus 4, WebServer, and the SymNav software. It is
recommended that the default passwords be changed after installation is complete. As a security measure,
store the passwords in the administrator's secured files or in a limited access area.
Default IP Addresses
These settings provide access and control of the SymDec 16 plus 4 over an IP network.The default Ethernet
setting is
DHCP
. To access these IP addresses the Ethernet setting must be changed to
Static.
These IP addresses should be changed before you connect to your IP network. Contact your network administrator to obtain your
network specific addresses.
Table 1.
Default passwords
Password name
Program
Changeable by user
Default password
user 1
On Screen Display (OSD)
Yes, through the Main menu
111111
user 2
On Screen Display (OSD)
Yes, through the Main menu
222222
user 3
On Screen Display (OSD)
Yes, through the Main menu
333333
Table 2.
Default IP addresses
Address name
Changeable by user
Default user
IP Address
Yes
192.168.1.82
Subnet Mask
Yes
255.255.255.0
Gateway Address
Yes
192.168.1.1
Summary of Contents for SymDec 16 plus 4
