NX-592E
Installation Manual
8
Wiring connections
1. Remove panel AC power and disconnect the backup battery.
2. Wire the module to the panel bus and power terminals (see
Figure 4
on page 8 and
Table 3
on page 8).
Figure 4. Wiring connections for the Wireless Gateway
To prevent damage to the panel or module, you must remove panel AC power and disconnect the backup battery prior to
changing any wire connections.
Table 3.
Terminal descriptions
Terminal descriptions
POS
Connect to the KP POS terminal of the NetworX panel
COM
Connect to the KP COM terminal of the NetworX panel
DATA
Connect to the KP DATA terminal of the NetworX panel
KP POS
KP COM
KP DATA
POS
COM
DATA
Panel
Gateway
